10" Heavy Lift LR FPV Drone Bundle (6S ELRS 915)
10" Heavy Lift LR FPV Drone Bundle (6S ELRS 915)

Vendor:FpvSupplyCo

10" Heavy Lift LR FPV Drone Bundle (6S ELRS 915)

$0.00
OVERALL SYSTEM PERFORMANCE

  • Airframe Class: 10-inch FPV Long-Range Quadcopter
  • Payload: 2-5kg
  • Flying Time (With Load): 8-15 min
  • Flying Time (No Load): 30 min
  • Battery: 8000mAh - 12000mAh 6S 22.2V
  • Image Transmission Distance: 5-10km (Open environment, no interference)
  • Flying Distance: 5-20km
  • Max Speed: 150km/h

PRODUCT OVERVIEW

Designed for demanding commercial operations and heavy-lift cinema rigs, this high-performance 10-inch long-range FPV drone delivers an efficient 30min unladen flight time or 8-15min carrying heavy 2-5kg payloads on a robust 6S propulsion system.

Equipped with a ferocious 3000mW (3W) 5.8G analog VTX, GT-E2 starlight night vision FPV camera, and a deep-penetration ELRS 915MHz receiver, it ensures absolute signal confidence up to 5-10km (max range 5-20km) at speeds up to 150km/h for heavy-lift freestyle and long-range cinematic filming.

CORE HIGHLIGHTS

  • T700 Carbon Frame & Reinforced 7mm Arms
Milled with premium T700 carbon fiber featuring ultra-thick 7mm arms and a massive 427mm wheelbase to eliminate high-frequency oscillations and secure maximum rigidity during high-speed heavy-lift flights.
  • Massive 3W Ultra-Power VTX
Blast through dense obstacles with up to 3000mW (3W) output running the IRC Tramp protocol. Paired with a Lollipop 4+ 150mm antenna for industry-leading analog signal penetration.
  • GT-E2 Night Vision FPV Camera
Master low-light scouting and night operations. Boasts an ultra-low minimum illumination of 0.01Lux @ F1.2 and a wide D160 lens (160-degree FOV).
  • Sub-GHz ELRS 915MHz Receiver Link
Powered by an ESP8285 MCU and SX1276 RF chip running the low-latency CRSF protocol, ensuring unmatched control range with support for WIFI firmware updates.


SPECIFICATIONS

1.Frame
  • Structure & Wheelbase: True H / 427mm
  • Material & Thickness: Premium T700 Carbon Fiber / 7mm Arms, 2mm Top & Bottom Plates
  • Electronic Space Height: 25mm
  • Stack Mount Dimensions: M3 * 30.5mm flight stack holes / M2 * 20/25.5mm & M3 * 30.5mm VTX holes
  • Spacing & Clearances: 20mm FPV camera spacing / Max 10.0 inch propeller frame clearance
  • Motor Mounting Pattern: 16mm x 16mm / 19mm x 19mm
  • Plate Dimensions: Top Plate 21.6 x 5cm / Bottom Plate 22.3 x 10.8cm

2.Motor
  • Model & KV: 3115 Cinematic Edition / 900KV
  • Operating Rated Voltage: 6S
  • No-load Current: 1.28A / 12V
  • Phase Resistance: 38 mOhm
  • Motor Weight: 112.3g
  • Maximum Current: 64.7A
  • Maximum Power: 1617W
  • Maximum Thrust: 4185g
  • Motor Size: Diameter 37.1 x 32.1mm

3.Flight Controller (FC - F405)
  • Dimensions: 37 x 37mm (30.5 x 30.5mm mounting spacing)
  • Onboard BEC outputs: 9V regulated (max 2A) / 5V regulated (max 3A) / 4.5V (Receiver power, USB only)
  • System Interfaces: CR (Current), M1 (Camera tune), VI (Camera input), VO (VTX output), LED, B-/B+ (Buzzer), RC (SmartPort), Rssi

4.ESC (65A 6S)
  • Model & Firmware: BLHeli_S 4IN1 60V1
  • Continuous Current: 65A
  • Burst Current (10s): 75A
  • BEC: No
  • Current Sensor: Yes
  • Battery Cells: 2-6S LiPo
  • Weight: 21.5g
  • Size: 37 x 42.7mm (30.5 x 30.5mm mounting spacing)

5.Camera (Night Vision)
  • Model & Optical Sensor: GT-E2 (E2) / 1/3" CMOS (16:9 aspect ratio)
  • Resolution & Format: 1280H x 720V / NTSC/PAL Switchable
  • Lens Optics & FOV: 2.1mm focal length / D160 diagonal Field of View (160-degree FOV)
  • Low-Light Capability: Min. Illumination 0.01Lux @ F1.2 / S/N Ratio >52dB (AGC OFF)

6.VTX & Antenna
  • Supported Voltage: 7-36V
  • BEC Output: 5V / 500mA
  • VTX Transmission Power: PIT / 25mW / 3000mW (3W)
  • VTX System Protocols: IRC Tramp / 72 Channels (Customizable within 4867-6100MHz range)
  • Form Factor: 38.5 x 35.5 x 10.76mm (30.5 x 30.5mm mounting) / Weight: 15.6g / MMCX interface
  • Lollipop 4+ Long Antenna: 150mm stem length / High-impact PC+ABS shell / Root reinforcement with 360-degree protection

7.Receiver (RX)
  • Model & Protocol: ELRS 915MHz / CSRF Protocol (915MHz or 868MHz frequency range)
  • Chipset Stack: ESP8285 MCU + SX1276IMLTRT RF Transceiver
  • Operating Power Input: 5V (100mA current draw) / IPEX1 antenna connector
  • Size & Weight: 12mm x 12mm x 3mm / Ultra-light 0.6g (without antenna) / WIFI update supported
  • Telemetry Output Power: <17dBm
8.Propellers
  • Model & Specs: 1050-3 Tri-Blade Props / Pitch 5in / 5mm Center Hole
  • Weight & Material: 17g per prop / High-strength Fiberglass Nylon

PACKAGE INCLUDES

  • 1 × 10" True-H FPV Drone Frame (427mm Wheelbase, T700 Carbon, 7mm Arms)
  • 1 × F405 Flight Controller (30.5 x 30.5mm Mounting)
  • 1 × 65A BLHeli_S 4-in-1 ESC (2–6S, Current Sensor Included)
  • 4 × 3115 900KV Brushless Motors
  • 1 × GT-E2 Low-Light Night Vision FPV Camera (Pre-installed)
  • 1 × 5.8GHz 3W Analog Video Transmitter (VTX, Pre-installed)
  • 1 × ExpressLRS 915MHz Long-Range Receiver (Pre-installed)
  • 1 × Lollipop 4+ Long-Stem 150mm Antenna (MMCX, Pre-installed)
  • 4 × 1050 Tri-Blade Propellers (2x CW, 2x CCW)


Out of stock

Pairs well with

In stock! Ships within 1-5 business days.

7-day risk-free trial

1-Year Warranty

Complimentary shipping & returns

Original Manufacturer

FAQs

Please read our FAQs page to find out more.

Learn More

How do I know if a product is right for my build?

The best way to confirm is to compare the product specifications with your build requirements. Check the product details carefully, including size, compatibility notes, connector type, and any technical information listed on the page.

Where can I find product specifications?

Product specifications are usually listed on the product page. If you need more details, review the description, technical notes, and any included compatibility information before placing your order.

Didn’t find your answer?

Don't hestitate to contact us