7" Heavy Lift LR FPV Drone Bundle (6S ELRS 915)
7" Heavy Lift LR FPV Drone Bundle (6S ELRS 915)

Vendor:FpvSupplyCo

7" Heavy Lift LR FPV Drone Bundle (6S ELRS 915)

$0.00
OVERALL SYSTEM PERFORMANCE

  • Airframe Class: 7-inch FPV Long-Range Quadcopter
  • Payload: 2-3kg
  • Flying Time (With Load): 8-15 min
  • Flying Time (No Load): 30 min
  • Battery: 8000mAh 6S 22.2V
  • Image Transmission Distance: 5-10km (Open environment, no interference)
  • Flying Distance: 5-20km
  • Max Speed: 150km/h

PRODUCT OVERVIEW

Designed for demanding commercial and cinematic operations, this high-performance 7-inch long-range FPV drone delivers an efficient 30min unladen flight time or 8-15min carrying heavy 2-3kg payloads on a robust 6S propulsion system.

Equipped with a high-power 2500mW (2.5W) 5.8G analog VTX, GT-E2 starlight night vision FPV camera, and a deep-penetration ELRS 915MHz receiver, it ensures absolute signal confidence up to 5-10km (max range 5-20km) at speeds up to 150km/h for heavy-lift freestyle and long-range cinematic filming.

HIGHLIGHTS

  • T700 Carbon Frame & Reinforced 7mm Arms
Milled with premium T700 carbon fiber featuring ultra-thick 7mm arms to eliminate high-frequency oscillations and secure maximum rigidity during high-speed heavy-lift flights.
  • Massive 2.5W Ultra-Power VTX
Blast through obstacles with up to 2500mW (34.04dBm) output paired with a Lollipop 4+ 150mm antenna for industry-leading analog signal penetration.
  • GT-E2 Night Vision FPV Camera
Master low-light scouting and night operations. Boasts an ultra-low minimum illumination of 0.01Lux @ F1.2 and a wide D160 lens (160-degree FOV).
  • Sub-GHz ELRS 915MHz Receiver Link
Powered by an ESP8285 MCU and SX1276 RF chip running the low-latency CRSF protocol, ensuring unmatched control range with support for WIFI firmware updates.


SPECIFICATIONS

1.Frame
  • Structure & Wheelbase: True H / 295mm
  • Material & Thickness: Premium T700 Carbon Fiber / 7mm Arms, 2mm Top & Bottom Plates
  • Electronic Space Height: 25mm
  • Stack Mount Dimensions: M3 * 30.5mm flight stack holes / M2 * 20/25.5mm & M3 * 30.5mm VTX holes
  • Spacing & Clearances: 20mm FPV camera spacing / Max 10.0 inch propeller frame clearance
  • Motor Mounting Pattern: 16mm x 16mm / 19mm x 19mm

2.Motor
  • Model & KV: 2810 Cinematic Edition / 1500KV
  • Operating Rated Voltage: 6S
  • No-load Current: 1A / 10V
  • Phase Resistance: 45 mOhm
  • Motor Weight: 47.9g
  • Maximum Current: 55A
  • Maximum Power: 900W
  • Maximum Thrust: 2655g
  • Motor Size: Diameter 33.5 x 17.5mm

3.Flight Controller (FC - F405)
  • Dimensions: 37 x 37mm (30.5 x 30.5mm mounting spacing)
  • Onboard BEC outputs: 9V regulated (max 2A) / 5V regulated (max 3A) / 4.5V (Receiver power, USB only)
  • System Interfaces: CR (Current), M1 (Camera tune), VI (Camera input), VO (VTX output), LED, B-/B+ (Buzzer), RC (SmartPort), Rssi

4.ESC (60A 6S)
  • Model & Firmware: BLHeli_S 4IN1 60A V1
  • Continuous Current: 60A
  • Burst Current (10s): 70A
  • BEC: No
  • Current Sensor: Yes
  • Battery Cells: 2-6S LiPo
  • Weight: 21.5g
  • Size: 37 x 42.7mm (30.5 x 30.5mm mounting spacing)

5.Camera (Night Vision)
  • Model & Optical Sensor: GT-E2 (E2) / 1/3" CMOS (16:9 aspect ratio)
  • Resolution & Format: 1280H x 720V / NTSC/PAL Switchable
  • Lens Optics & FOV: 2.1mm focal length / D160 diagonal Field of View (160-degree FOV)
  • Low-Light Capability: Min. Illumination 0.01Lux @ F1.2 / S/N Ratio >52dB (AGC OFF)

6.VTX & Antenna
  • Supported Voltage: 7-36V
  • BEC Output: 5V / 500mA
  • VTX Transmission Power: PIT / 25mW (13.95dBm) / 2500mW (34.04dBm)
  • VTX System Protocols: TBS SmartAudio / Standard 40 Channels (A/B/E/F/R/L/V/U/H)
  • Form Factor: 38 x 38 x 13mm (30.5 x 30.5mm mounting) / Weight: 28g / MMCX interface
  • Lollipop 4+ Long Antenna: 150mm stem length / High-impact PC+ABS shell / Root reinforcement with 360-degree protection

7.Receiver (RX)
  • Model & Protocol: ELRS 915MHz / CSRF Protocol (915MHz or 868MHz frequency range)
  • Chipset Stack: ESP8285 MCU + SX1276IMLTRT RF Transceiver
  • Operating Power Input: 5V (100mA current draw) / IPEX1 antenna connector
  • Size & Weight: 12mm x 12mm x 3mm / Ultra-light 0.6g (without antenna) / WIFI update supported
  • Telemetry Output Power: <17dBm

8.Propellers
  • Model & Specs: 7040 Tri-Blade Props / Pitch 4 / 5mm Center Hole
  • Weight & Material: 9.1g per prop / High-strength Polycarbonate (PC)


PACKAGE INCLUDES

  • 1 × 7" True-H FPV Drone Frame (295mm Wheelbase, T700 Carbon, 7mm Arms)
  • 1 × F405 Flight Controller (30.5 x 30.5mm Mounting)
  • 1 × 60A BLHeli_S 4-in-1 ESC (2–6S, Current Sensor Included)
  • 4 × 2810 1500KV Brushless Motors
  • 1 × GT-E2 Low-Light Night Vision FPV Camera (Pre-installed)
  • 1 × 5.8GHz 2.5W Analog Video Transmitter (VTX, Pre-installed)
  • 1 × ExpressLRS 915MHz Long-Range Receiver (Pre-installed)
  • 1 × Lollipop 4+ Long-Stem 150mm Antenna (MMCX, Pre-installed)
  • 4 × 7040 Tri-Blade Propellers (2x CW, 2x CCW)


Out of stock

Pairs well with

In stock! Ships within 1-5 business days.

7-day risk-free trial

1-Year Warranty

Complimentary shipping & returns

Original Manufacturer

FAQs

Please read our FAQs page to find out more.

Learn More

How do I know if a product is right for my build?

The best way to confirm is to compare the product specifications with your build requirements. Check the product details carefully, including size, compatibility notes, connector type, and any technical information listed on the page.

Where can I find product specifications?

Product specifications are usually listed on the product page. If you need more details, review the description, technical notes, and any included compatibility information before placing your order.

Didn’t find your answer?

Don't hestitate to contact us